Friday, July 20, 2012

sPINner stories: Cross Hole burrs

A manufacturer of small 7075-T6 aluminum valve bodies acquired a sPINner to help deburr difficult  cross-hole burrs. The pictures below detail the results.

Monday, July 9, 2012

sPINner stories: Brass Electrical Connectors

A manufacturer of electrical connector parts acquired a sPINner to deburr the ID areas of the parts. These parts are all brass. The pictures details how the media is able to remove the ID burrs on these parts. The parts are run for 20 minutes with 1.2mm media in the sPINner to remove the ID burrs.