Monday, July 9, 2012

sPINner stories: Brass Electrical Connectors


A manufacturer of electrical connector parts acquired a sPINner to deburr the ID areas of the parts. These parts are all brass. The pictures details how the media is able to remove the ID burrs on these parts. The parts are run for 20 minutes with 1.2mm media in the sPINner to remove the ID burrs.
Posted by at
Labels: , , ,

3 comments:

  1. fortunebrassindustriesJuly 4, 2013 at 7:55 AM

    Great Post About Brass Electrical Switchgear Parts era.

    Thanks For Sharing Post.

    ReplyDelete
  2. UnknownFebruary 9, 2015 at 12:20 AM

    This comment has been removed by a blog administrator.

    ReplyDelete
  3. IFTC IndiaAugust 26, 2015 at 1:57 AM

    The information which you have provided is very good. It is very useful who is looking for Brass Compression Fittings

    ReplyDelete

Please leave us a comment on any thoughts, observations, ideas or suggestions you may have that we haven't discussed on this posting

Subscribe to: Post Comments (Atom)